ATACR 4-16x42 F1 Riflescope - F1 MIL-XT WITH Z HOLD - ILLUMINATED
If you need something compact yet powerful, the ATACR 4-16x42 F1 delivers.
The fully multi-coated ED glass lenses within are stunning. Adjustments are standard with the Nightforce low profile ZeroHold feature, and available in .1 Mrad (12 Mils per revolution) or .25 MOA (30 MOA per revolution) increments. A capped windage adjustment helps prevent accidental adjustment in the field. The parallax adjustment is marked with approximate numbered distances and is coupled with DigIllum digital reticle illumination. The eyepiece features enhanced engraving, an integrated Power Throw Lever (PTL) and an XtremeSpeed thread for making a fast diopter adjustment. All of these features are paired with intelligent, Nightforce F1, first focal plane, reticles that provide for fast hold-off adjustments and precise ranging calculations.
The ATACR 4-16x42 F1 sets a new standard in mid-powered optics.
Tenebraex Flip Covers are now included with ATACR riflescopes.
Click Here For ATACR Owners ManualSPECIFICATIONS
Focal Plane - First
Magnification Range - 4-16x
Objective lens diameter - 42mm
Tube diameter - 34mm/1.34in in
Internal adjustment range (MOA/Mil)
e: 89 MOA
w: 60 MOA
e: 26 Mil
w: 18 Mil
Calibrated Ranging Power - N/A
Parallax adjustment - 45 yd - ∞
Exit pupil diameter -4x:10.3mm, 16x:2.7mm
Eye relief - 85-90mm/3.35-3.54 in
Field of view @100 yards/100 meters
16x: 2.1 m
Objective outer diameter - 50mm
Eyepiece outer diameter - 45 mm
Overall length (inches/mm) - 12.6in/320 mm
Weight (ounces/grams) - 30 oz/850g
Mounting length (inches/mm) - 6.3 in/160 mm
Front/Rear Mounting Length - 2.00 in/2.53 in
PTL (Power Throw Lever) - Standard
Illumination - Digillum
Elevation Feature - Zero Hold
Designed to meet the needs of today's precision rifle competitor, the MIL-XT reticle allows for fast and accurate shots on target.
The MIL-XT has a simple center dot for a fine aiming point at center, while the main lines feature .2 Mil-Radian holds. Each whole Mil-Radian is numbered for fast reference under even stressful conditions.
Below center, whole Mil-Radian intersections feature a floating dot. Dots are placed at .2 Mil-Radian increments, while whole Mil-Radians are increased in size for fast counting. Additional marks are placed at half Mil-Radian increments as well. Numbers below center alternate in size for easy counting and verification of appropriate hold points.
This reticle was designed for the competitive and field shooter, and is certain to give a competitive edge to anyone who uses it.
CLICK HERE FOR MORE RETICLE INFORMATION
Throw Lever (PTL)
Instant magnification changes in a fraction of a second, even if you are wearing gloves.
First Focal Plane
As you increase magnification, the reticule increases proportionately.