Best Sellers
;)
Product Description
VIPER RED DOT 6 MOA DOT is currently out of stock.
THIS ITEM IS NOT READILY AVAILABLE - PLEASE CONTACT US PRIOR TO ORDERING
The Viper Red Dot's super-low mounting height makes it the perfect solution for handguns with cutout slides. The Viper gives shooters the simplicity and speed advantage of a dot sight, while co-witnessing with suppressor height iron sights. The trade off? Nothing. The 6 MOA dot diameter gets shooters on target fast.
Fully multi-coated, ultra-clear lens offers a wide, unobstructed field of view. The left-side up/down power and illumination controls are easy to access and manipulate. Recessed 1 MOA windage and elevation adjustments are super clean, protected from incidental contact, and always at the ready. It runs on a CR 2032 battery.
FEATURES
OPTICAL FEATURES
✔ Fully Multi-Coated - Multiple anti-reflective coatings on all air-to-glass surfaces increase light transmission.
✔ Parallax Free - All red dot and holographic sights will exhibit some small amount of parallax. Matching current industry practice, this small amount would be considered "parallax free" and will make a negligible difference in the Viper's performance.
CONSTRUCTION FEATURES
✔ Single-Piece Chassis - Compact and lightweight.
✔ Waterproof - O-ring seals prevent moisture, dust and debris from penetrating for reliable performance in all environments.
✔ Shockproof - Rugged construction withstands recoil and impact.
✔ Hard Anodized Finish - Highly durable low-glare matte finish.
✔ ArmorTek - Ultra-hard, scratch-resistant coating protects exterior lenses from scratches, oil and dirt.
CONVENIENCE FEATURES
✔ Unlimited Eye Relief - Non-critical eye relief for rapid target acquisition.
✔ Battery Life - 14-hour auto-shutdown feature maximizes battery life. Up to 150 hours of use at highest setting. Use at the more common lower settings can allow up to 30,000 hours.
COMPATIBILITY FEATURES
✔ Lug/Screw Footprint - Compatible with Burris Fastfire/Docter
If mounting to a handgun with slide cutout:
Slide cutout type - Glock MOS (9mm or .40) - (SHIM-BDS) - Use plate #1.
Glock MOS (.45 or 10mm) (SHIM-BDS). - Use plate #5.
M&P CORE- Plate 5 and the "C" screws
FNX-45- (SHIM-BDS). Uses the non-Trjicon plate.
Rear sight dovetail mounts:
Sig P220 series - Mount available at EGWguns.com
1911s - Mounts available at EGWguns.com
Springfield XD/XDM: Mounts available at Springer Precison.
SPECIFICATIONS
» Magnification - 1 x
» Eye Relief - Unlimited
» Dot Size - 6 MOA
» Adjustment Graduation - 1 MOA
» Max Elevation Adjustment - 120 MOA
» Max Windage Adjustment - 120 MOA
» Parallax Setting - Parallax free
» Length - 1.8 inches
» Weight - 1.1 ounces
WHAT'S IN THE BOX
❒ Weaver / Picatinny Mount
❒ T-10 Torx Wrench
❒ CR 2032 Battery
❒ Lens Cloth
❒ Flathead Wrench
❒ Protective Cover
RETICLE
◉ 6 MOA DOT - The daylight bright red dot is easy to see and paints targets regardless of lighting conditions or background.
THIS ITEM IS NOT READILY AVAILABLE - PLEASE CONTACT US PRIOR TO ORDERING
The Viper Red Dot's super-low mounting height makes it the perfect solution for handguns with cutout slides. The Viper gives shooters the simplicity and speed advantage of a dot sight, while co-witnessing with suppressor height iron sights. The trade off? Nothing. The 6 MOA dot diameter gets shooters on target fast.
Fully multi-coated, ultra-clear lens offers a wide, unobstructed field of view. The left-side up/down power and illumination controls are easy to access and manipulate. Recessed 1 MOA windage and elevation adjustments are super clean, protected from incidental contact, and always at the ready. It runs on a CR 2032 battery.
FEATURES
OPTICAL FEATURES
✔ Fully Multi-Coated - Multiple anti-reflective coatings on all air-to-glass surfaces increase light transmission.
✔ Parallax Free - All red dot and holographic sights will exhibit some small amount of parallax. Matching current industry practice, this small amount would be considered "parallax free" and will make a negligible difference in the Viper's performance.
CONSTRUCTION FEATURES
✔ Single-Piece Chassis - Compact and lightweight.
✔ Waterproof - O-ring seals prevent moisture, dust and debris from penetrating for reliable performance in all environments.
✔ Shockproof - Rugged construction withstands recoil and impact.
✔ Hard Anodized Finish - Highly durable low-glare matte finish.
✔ ArmorTek - Ultra-hard, scratch-resistant coating protects exterior lenses from scratches, oil and dirt.
CONVENIENCE FEATURES
✔ Unlimited Eye Relief - Non-critical eye relief for rapid target acquisition.
✔ Battery Life - 14-hour auto-shutdown feature maximizes battery life. Up to 150 hours of use at highest setting. Use at the more common lower settings can allow up to 30,000 hours.
COMPATIBILITY FEATURES
✔ Lug/Screw Footprint - Compatible with Burris Fastfire/Docter
If mounting to a handgun with slide cutout:
Slide cutout type - Glock MOS (9mm or .40) - (SHIM-BDS) - Use plate #1.
Glock MOS (.45 or 10mm) (SHIM-BDS). - Use plate #5.
M&P CORE- Plate 5 and the "C" screws
FNX-45- (SHIM-BDS). Uses the non-Trjicon plate.
Rear sight dovetail mounts:
Sig P220 series - Mount available at EGWguns.com
1911s - Mounts available at EGWguns.com
Springfield XD/XDM: Mounts available at Springer Precison.
SPECIFICATIONS
» Magnification - 1 x
» Eye Relief - Unlimited
» Dot Size - 6 MOA
» Adjustment Graduation - 1 MOA
» Max Elevation Adjustment - 120 MOA
» Max Windage Adjustment - 120 MOA
» Parallax Setting - Parallax free
» Length - 1.8 inches
» Weight - 1.1 ounces
WHAT'S IN THE BOX
❒ Weaver / Picatinny Mount
❒ T-10 Torx Wrench
❒ CR 2032 Battery
❒ Lens Cloth
❒ Flathead Wrench
❒ Protective Cover
RETICLE
◉ 6 MOA DOT - The daylight bright red dot is easy to see and paints targets regardless of lighting conditions or background.
